Colop E-mark White Wired & Wireless Battery 600 x 600 DPI

Wifi-connection The e-mark generates its own WIFI network, through which it connects to your mobile device (such as a smartphone, tablet or laptop). Imprints are transferred quickly and can be printed immediately. Markings for exact positioning Markings on the side of the e-mark ensure a reliable positioning on your documents, with the help of advanced sensor technology. A notch in the middle of the marking shows the center line of the imprint. It also works perfectly with COLOP labels. Transparent window A transparent window in the front provides a better view of the imprint during marking. Light strip Rotating LEDs around the e-mark indicate the current state and connectivity to your mobile device Tricolour ink cartridge Easily replaceable and long-lasting cartridge for high-quality full-colour imprints. Printhead The printhead is integrated in the cartridge and visible on the bottom side of the e-mark. Battery The inbuilt quick-charging Li-ion battery (11.1 V) allows use of the e-mark for several hours (around 5 hours continuous marking) without power supply. It can be fully charged within 3 hours (0 - 100 %). Docking station The docking station serves for quick charging of the battery and helps prevent the printhead from drying out. Protection cap Is integrated in the docking station and optimally protects the printhead against drying-out. The e-mark should always be put in the docking station with its integrated protecting cap. Sliding wheels Move gently from left to right or the other way round to make an imprint, supported by sliding wheels. Sensor An optical sensor provides speed control for the best and most reliable imprint results. USB-interface Connect the e-mark with your computer via a Micro-USB cable. Note that charging can only be done with the power cable. ON/OFF switch Switch on the e-mark through an opening on the bottom of the docking station to avoid drying-out of the printhead. Contacts 4 contact pins provide a connection between the e-mark and docking station for charging. Protective cover Can be easily opened to change a cartridge via a small notch on the bottom of the cover.

Ports & interfaces

• Connectivity technology: Wired & Wireless
• USB connector: Micro-USB

Weight & dimensions

• Weight: 224.5 g

Printing

• Maximum resolution: 600 x 600 DPI
• Colour printing: Y

Power

• Power source type: Battery
• Battery technology: Lithium-Ion (Li-Ion)
• Battery voltage: 11.1 V
• Battery capacity: 600 mAh

Network

• Wi-Fi: Y

Design

• Product colour: White
• On/off switch: Y

Condition: new. When shipped to GB or ROI, all our electronic articles come with a BSI-proven power adaptor fitted by our company. For free! (As long the device comes with a power cable.)