Navilock NL-852EUSB GPS receiver module USB Brown, Green, White

GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses USB 2.0.

- Connector: WTB USB 2.0
- Chipset: u-blox 8 UBX-M8030-KT
- Frequency:
- GPS: L1, 1575.4200 MHz
- GLONASS: L1, 1602 (k x 0,5625) MHz
- BEIDOU COMPASS: B1, 1561.0980 MHz
- GALILEO E1, 1575.4200 MHz
- QZSS L1, 1575.4200 MHz
- Accepts the signals of up to 72 satellites at the same time
- Supports AssistNow online/offline,
- SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- USB specification 2.0
- Auto Baud Rate up to 115200 bps
- Update rate:
- single GNSS: 18 Hz (e.g. GPS solo)
- multi GNSS: 10 Hz (e.g. GPS+GLONASS)
- Sensitivity: –167 dBm
- LED-indicator for GPS-status
- Operating temperature:
- 40 °C ~ 85 °C without battery
- 20 °C ~ 60 °C with battery
- Power supply: 5 Volt
- Current consumption: max. 45 mA
- Cold start in ca. 26 seconds
- Hot start in ca. 1 second
- Positioning accuracy:
- 2.5 m CEP (Circular Error Probable) and
- 2.0 m CEP with SBAS
- Dimension (LxWxH): ca. 30 x30 x 7.90 mm

Technical details

• Product colour: Brown, Green, White
• WAAS capability: Yes

Weight & dimensions

• Width: 30 mm
• Depth: 30 mm
• Height: 7.9 mm

GPS Performance

• Interface: USB
• Sensitivity: -167 dBmW
• Chipset: u-blox 8
• Navigation signals supported: B1, E1, L1
• Frequency: 1575.42 MHz
• Acquisition times - cold: 26 s
• Acquisition times - hot: 1 s
• Navigation protocols: GGA, GSA, GSV, RMC, VTG

Indication

• LED indicators: Yes

Condition: new. When shipped to GB or ROI, all our electronic articles come with a BSI-proven power adaptor fitted by our company. For free! (As long the device comes with a power cable.)