Kurth Electronic KE7701 UTP/STP cable tester Blue, Orange

The cable tester and cable finder set KE7701 is the ideal basic equipment for all technicians searching for cables and faults in telephone and data networks. The KE7000 are easy to use test devices for patch, LAN and telecommunication cabling and coaxial cables. Unshielded and shielded connection cables with twisted pairs (UTP and STP cables) in installed networks or patch cables can be tested and verified. BNC and F-socket coaxial cables can be tested for continuity using the RJ45 coax adapter. Occurring errors such as mix-ups, interruptions, short circuits and screen errors are shown on the displays. The KE7000 provide clear, fast and immediately evaluable status information on the LCD displays for cable lengths up to approximately 150 m. The cable tracer kits consist of EASYTEST and PROBE and enable any technician to find any type of cable, wires and wire pairs in the shortest possible time without time-consuming skinning work. The cable finders can be used for all types of cables such as telephone cables, bell lines, data cables of all classes, coaxial cables and voltage-free electrical lines and are overvoltage protected against accidental contact with external voltage > 100 V. The KE7701 set combines two KE7000 with the KE701 Telco Kit. Like the K3E01 Classic Kit, it features a tone generator with a RJ11 connector, two crocodile clips and a continuity test via LED. Additionally, it comes equipped with a RJ45 connector for detecting active network connections and assigning the active data port to e.g. the switch. A continuity test with a resistance-dependent tone enables a quick assessment of the cable condition. The KE701 Telco Kit is protected against accidental contact with 230 V mains voltage through an overvoltage protection up to 500 V. KE7701 – reliable, robust and cost-effective.

Technical details

• Product type: UTP/STP cable tester
• Supported connectors: RJ-11, RJ-45
• Built-in display: Y
• Test type: Continuity testing, Cross-connection testing, Shielding testing, Short circuit testing, Transmission testing
• Power range: 7.5 - 10 dBm
• Maximum cable length: 150 m
• Display type: LCD
• Product colour: Blue, Orange
• Units of measurement: dBm
• Cable type: UTP 4 pair, STP, FTP, 568A, 568B, USOC, Coax (adaptor available optionally)
• Power LED: Y
• Accuracy: ±1% (quartz)

Weight & dimensions

• Width: 68 mm
• Depth: 96 mm
• Height: 25 mm
• Weight: 150 g

Power

• Battery voltage: 9 V
• Battery low indication: Y
• Auto power off: Y

Operational conditions

• Operating temperature (T-T): 0 - 50 °C

Packaging content

• Storage pouch: Y
• Batteries included: Y

Condition: new. When shipped to GB or ROI, all our electronic articles come with a BSI-proven power adaptor fitted by our company. For free! (As long the device comes with a power cable.)