Lindy 47661 networking cable Orange 0.5 m Cat7 S/FTP (S-STP)

Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.

The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.

The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.

This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".

Technical details

• Sustainability compliance: Yes
• Sustainability certificates: CE, RoHS

Weight & dimensions

• Width: 116 mm
• Depth: 228 mm
• Height: 83 mm
• Outer diameter: 6.5 mm

Operational conditions

• Operating temperature (T-T): -10 - 60 °C
• Storage temperature (T-T): -20 - 75 °C

Packaging data

• Quantity per pack: 1 pc(s)
• Package type: Polybag

Features

• Cable length: 0.5 m
• Cable standard: Cat7
• Cable shielding: S/FTP (S-STP)
• Connector 1: RJ-45
• Connector 2: RJ-45
• Product colour: Orange
• Connector 1 gender: Male
• Connector 2 gender: Male
• Connector 1 form factor: Straight
• Connector 2 form factor: Straight
• Connector contacts plating: Gold
• Jacket material: Low smoke zero halogen (LSZH)
• Cable shape: Round
• Conductor material: Copper
• Cabling technology: 10GBase-T
• Ethernet interface type: 10 Gigabit Ethernet
• AWG wire size: 26
• Data transfer rate: 10000 Mbit/s
• Frequency: 600 MHz
• Bend radius (min): 7.8 cm
• Nominal attenuation: 51.4dB/100m @600MHz
• Certification: ISO/IEC 11801

Condition: new. When shipped to GB or ROI, all our electronic articles come with a BSI-proven power adaptor fitted by our company. For free! (As long the device comes with a power cable.)