Intel SSDSC2KB960G801 internal solid state drive 2.5" 960 GB Serial ATA III TLC 3D NAND

Enhanced Power Loss Data Protection

Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.

Hardware Encryption

Hardware encryption is data encryption done at the drive level. This is used to ensure that the data stored on the drive is secured from unwanted intrusion.

Temperature Monitoring and Logging

Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.

End-to-End Data Protection

End-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back.

Power

• Power consumption (idle): 1 W

Operational conditions

• Operating temperature (T-T): 0 - 70 °C
• Maximum operating temperature: 70 °C
• Operating vibration: 2.17 G
• Non-operating vibration: 3.13 G
• Operating shock: 1000 G
• Non-operating shock: 1000 G
• Operating / non-operating shock: 1000 G/0.5 msec

Brand-specific features

• Intel High Endurance Technology (HET): No
• Intel® Rapid Start Technology: No
• Intel® Remote Secure Erase: No
• Intel® Smart Response Technology: No
• Intel Smart Response Technology version: 0.00

Other features

• Product colour: Silver
• Processor family: Intel SSD D3
• Drive capacity: 960 GB
• Launch date: Q3'18
• SSD endurance rating: 3.5 PBW
• SSD hardware encryption: AES 256 bit
• SSD power consumption (active): 3.0W
• SSD power consumption (idle): 1.0W
• SSD shock: 1000 G/0.5 msec
• Sequential reading: 560 MB/s
• Sequential writing speed: 510 MB/s
• Status: Launched
• Last change: 63903513
• Intel Rapid Start Technology version: 0.00
• Remote Secure Erase (RSE) technology version: 0.00
• Product family: Data center SSD
• Product series: Intel® SSD D3-S4510 Series
• Product codename: Youngsville Refresh

Features

• SSD form factor: 2.5"
• SSD capacity: 960 GB
• Interface: Serial ATA III
• Memory type: TLC 3D NAND
• NVMe: No
• Component for: Server/workstation
• Hardware encryption: Yes
• NAND flash type: TLC (Triple Level Cell)
• Security algorithms: 256-bit AES
• Data transfer rate: 6 Gbit/s
• Read speed: 560 MB/s
• Write speed: 510 MB/s
• Random read (100% span): 95000 IOPS
• Random write (100% span): 36000 IOPS
• Read latency: 36 µs
• Write latency: 37 µs
• End-to-End Data Protection: Yes
• Enhanced Power Loss Data Protection technology: Yes
• SSD temperature monitoring: Yes
• Uncorrectable Bit Error Rate (UBER): < 1 per 10^17 bits read
• Mean time between failures (MTBF): 2000000 h
• Market segment: Server
• SSD ARK ID: 134912
• Export Control Classification Number (ECCN): 5A992C
• Commodity Classification Automated Tracking System (CCATS): G162706
• Temperature monitoring and logging: Yes

Logistics data

• Harmonized System (HS) code: 84717070

Condition: new. When shipped to GB or ROI, all our electronic articles come with a BSI-proven power adaptor fitted by our company. For free! (As long the device comes with a power cable.)