Goodram PX500 Gen.2 M.2 256 GB PCI Express 3.0 3D NAND NVMe

High performance
By creating a disk based on efficient memory in 3D NAND technology, we managed to achieve sequential transfer parameters of up to 2050 MB/s for reading and 1650 MB/s for write.

New possibilities with NVMe
NVM Express communication protocol was designed from the ground up to achieve the potential of fast flash based storage media. By utilizing it in PX500 gen.2 SSD, we were able to extract the maximum performance from its memory, controller and PCIe Gen 3 x4 interface. NVMe drastically reduces latency and queuing to bring much better responsiveness vs. AHCI-based SSD.

Heat under control
One of the problems that concerns M.2 SSD format is the thermal throttling – limitation of efficiency due to too high ambient temperature. To get it under control, PX500 gen.2 have special coating consisting of copper and graphite. Thanks to this, we have obtained very good heat dissipation, without increasing the size of the disk.

Weight & dimensions

• Width: 22 mm
• Depth: 80 mm
• Height: 3.5 mm

Operational conditions

• Operating temperature (T-T): 0 - 70 °C
• Storage temperature (T-T): -45 - 85 °C
• Maximum operating temperature: 70 °C

Packaging data

• Manual: Yes
• Package type: Blister

Features

• SSD form factor: M.2
• SSD capacity: 256 GB
• Interface: PCI Express 3.0
• Memory type: 3D NAND
• NVMe: Yes
• Component for: PC/Laptop
• Hardware encryption: No
• NVMe version: 1.3
• Read speed: 1850 MB/s
• Write speed: 950 MB/s
• M.2 key ID: M
• PCI Express interface data lanes: x4
• M.2 SSD size: 2280 (22 x 80 mm)
• Mean time between failures (MTBF): 2000000 h
• TBW rating: 170

Condition: new. When shipped to GB or ROI, all our electronic articles come with a BSI-proven power adaptor fitted by our company. For free! (As long the device comes with a power cable.)